Leather seats refurb

Post by **Tommyb 2579** » Sat Apr 29, 2023 1:08 pm

Ford Probe
2.5
1995
Light aspen
Cloth seats

Hi all
Can anyone tell me how come on the drivers seat base there is a bracket to bolt the seat runner on but no holes to fit it,is this the wrong base ie passengers side,because it’s not secure,pics added

Post by **cpt black** » Sat Apr 29, 2023 4:50 pm

Have you pocked a hole in the foam as sure it shold have 4 bolts on each seat from wot
i remember when i changed seats and bases around

Post by **Tommyb 2579** » Sat Apr 29, 2023 6:16 pm

Yeah I’ve poked about you can see the hole in the material I made,there’s been a bolt in at some point but when I move the bracket to where it sits flat no hole,confused.

Post by **Tommyb 2579** » Sat Apr 29, 2023 6:43 pm

Checked the drivers seat in the Probe and that is bolted and has no factory holes along it like in the picture,could this be a later base or adapted from another none Probe car.

Post by **Tommyb 2579** » Sat Apr 29, 2023 7:00 pm

Think I’ve cracked it must have had different runners fitted other seat passengers has no brackets on and bolted through the sides into a reinforced support piece so must be of later Probe,see pictures.

One has hole to access nut on side other is blanked and has brackets,so two different setups.

UKPOC forums

Leather seats refurb

Leather seats refurb

Re: Leather seats refurb

Re: Leather seats refurb

Re: Leather seats refurb

Re: Leather seats refurb

Who is online