24V 1994 Probe ABS Codes

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
ronandkate
Registered User
Posts: 33
Joined: Sun Oct 21, 2018 9:06 am
Has thanked: 3 times

24V 1994 Probe ABS Codes

Post by ronandkate » Mon Nov 29, 2021 2:31 pm

Hi all,

We're back to trying to work out why ABS fault codes continue to be a problem, because MOT is now overdue. :roll:

Cleared codes and still getting codes 12 ,13, 14 (wheel sensors) after changing all 4 sensors (all new!), actuator (second hand) and control module (second hand).

Wondering if we've done something stupid on the installation or missed a crucial step. Is there a way to test if the control module is OK? Or maybe it's a broken wire somewhere.

Appreciate any pointers.

And is there any way to disable to ABS light so we can get it MOT'd while we continue to play this "find the ABS problem" game?

Thanks in advance :)

Ron & Kate
Top
Micron
Site Admin
Posts: 3466
Joined: Thu Sep 06, 2018 6:08 pm
Location: South Norfolk
Has thanked: 62 times
Been thanked: 91 times

Re: 24V 1994 Probe ABS Codes

Post by Micron » Mon Nov 29, 2021 3:19 pm

Hi,

How did you reset the codes?
was the ABS module the correct one for your car, as there are differences.
As for disabling the light, the fact that it doesn't light up i the first place should make it a failure as far as the MOT goes.

Have you tried to clean the area around the ABS sensor, to ensure that the ABS ring is clean?
Admin and Owner of this fine club 😎

Location : South Norfolk
Top
ronandkate
Registered User
Posts: 33
Joined: Sun Oct 21, 2018 9:06 am
Has thanked: 3 times

Re: 24V 1994 Probe ABS Codes

Post by ronandkate » Mon Nov 29, 2021 3:56 pm

Hi,

Thanks for your speedy reply :D

To reset the codes we disconnected battery earth, pressed brake pedal for 30secs and reconnected battery. All codes were gone. Drove it for 25 km and we were celebrating and then the ABS light came back - codes 12, 13, 14 back :shock:

Module we bought from Mark back in the day. Both were Sumitomo.

Cleaning the sensor ring on each wheel - will give it a go, clear codes and cross fingers ...

Ron & Kate
Top
Kit
Tech Rep
Posts: 3559
Joined: Fri Sep 07, 2018 8:16 pm
Location: Vange, Basildon
Has thanked: 71 times
Been thanked: 115 times

Re: 24V 1994 Probe ABS Codes

Post by Kit » Mon Nov 29, 2021 4:02 pm

Got a couple of ABS modules here, would you like to borrow one ( or two).
Just, Cover the postage, please
PM me your address, please

Kit
Top
ronandkate
Registered User
Posts: 33
Joined: Sun Oct 21, 2018 9:06 am
Has thanked: 3 times

Re: 24V 1994 Probe ABS Codes

Post by ronandkate » Thu Dec 02, 2021 4:41 pm

Thanks Kit - so very kind of you to offer. :D

Will bear it in mind if cleaning the rings doesn't work ...
Top
Post Reply

Return to “The Garage - Technical Forum”

Who is online

Users browsing this forum: No registered users and 37 guests