Oil Sump Pan Replacement

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
Micron
Site Admin
Posts: 3466
Joined: Thu Sep 06, 2018 6:08 pm
Location: South Norfolk
Has thanked: 62 times
Been thanked: 91 times

Oil Sump Pan Replacement

Post by Micron » Sun Oct 17, 2021 5:54 pm

When changing the sump, do I need a basket of just RTV?
Admin and Owner of this fine club 😎

Location : South Norfolk
Top
Kit
Tech Rep
Posts: 3559
Joined: Fri Sep 07, 2018 8:16 pm
Location: Vange, Basildon
Has thanked: 71 times
Been thanked: 115 times

Re: Oil Sump Pan Replacement

Post by Kit » Sun Oct 17, 2021 6:07 pm

Micron wrote: ↑
Sun Oct 17, 2021 5:54 pm
 When changing the sump, do I need a basket of just RTV?
You, ( or someone’s) has asked this question before :|
I’ve only used sealant, before.
It’s not under pressure, so just make sure the mating surfaces are clean & flat

Kit
Top
Micron
Site Admin
Posts: 3466
Joined: Thu Sep 06, 2018 6:08 pm
Location: South Norfolk
Has thanked: 62 times
Been thanked: 91 times

Re: Oil Sump Pan Replacement

Post by Micron » Sun Oct 17, 2021 8:16 pm

Kit wrote: ↑
Sun Oct 17, 2021 6:07 pm
Micron wrote: ↑
Sun Oct 17, 2021 5:54 pm
 When changing the sump, do I need a basket of just RTV?
You, ( or someone’s) has asked this question before :|
I’ve only used sealant, before.
It’s not under pressure, so just make sure the mating surfaces are clean & flat

Kit
Yeah it was me but I couldn't remember, so I just asked again :lol:
Admin and Owner of this fine club 😎

Location : South Norfolk
Top
mojo98
Tech Rep
Posts: 2679
Joined: Thu Sep 06, 2018 10:52 pm
Location: Billingham
Has thanked: 42 times
Been thanked: 57 times

Re: Oil Sump Pan Replacement

Post by mojo98 » Sun Oct 17, 2021 8:45 pm

Micron wrote: ↑
Sun Oct 17, 2021 8:16 pm
Kit wrote: ↑
Sun Oct 17, 2021 6:07 pm
Micron wrote: ↑
Sun Oct 17, 2021 5:54 pm
 When changing the sump, do I need a basket of just RTV?
You, ( or someone’s) has asked this question before :|
I’ve only used sealant, before.
It’s not under pressure, so just make sure the mating surfaces are clean & flat

Kit
Yeah it was me but I couldn't remember, so I just asked again :lol:
And here's me thinking I've lost my marbles, 🤣🤣🤣 it's a age thing Trevor 😏😏
Top
Post Reply

Return to “The Garage - Technical Forum”

Who is online

Users browsing this forum: No registered users and 33 guests