Rewinding rear calipers

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
MikeyG
Full Member
Posts: 93
Joined: Thu Nov 29, 2018 6:01 pm
Has thanked: 1 time

Rewinding rear calipers

Post by MikeyG » Sun Jul 04, 2021 4:55 pm

Brand new rear calipers, neither retracts nor extends, means I'm probably doing something wrong. No brake fluid as I thought it's mechanical, tried bleeder open, closed, everything. The Allan screw in the back just turns with no success.
Top
Kit
Tech Rep
Posts: 3642
Joined: Fri Sep 07, 2018 8:16 pm
Location: Vange, Basildon
Has thanked: 75 times
Been thanked: 119 times

Re: Rewinding rear calipers

Post by Kit » Sun Jul 04, 2021 5:36 pm

Yes, not functioning correctly :?

Kit
Top
jrh
Full Member
Posts: 1088
Joined: Thu Sep 20, 2018 3:08 pm
Been thanked: 46 times

Re: Rewinding rear calipers

Post by jrh » Mon Jul 05, 2021 8:31 am

Hard to believe but if it's happening.....................
Choice is send them back or take apart and find out what's wrong.
Top
MikeyG
Full Member
Posts: 93
Joined: Thu Nov 29, 2018 6:01 pm
Has thanked: 1 time

Re: Rewinding rear calipers

Post by MikeyG » Mon Jul 05, 2021 4:00 pm

It's bonkers that it's both of them. I've taken the Allan screw out the back and its brand new - and the teeth inside look good too. Really bizzare. The old (I'm guess O.E) still operates fine! I've tried the Allan screws in that one and it works too. Struggling to think what else to try.
Top
Kit
Tech Rep
Posts: 3642
Joined: Fri Sep 07, 2018 8:16 pm
Location: Vange, Basildon
Has thanked: 75 times
Been thanked: 119 times

Re: Rewinding rear calipers

Post by Kit » Mon Jul 05, 2021 6:10 pm

May be to ‘Company’ that re-manufactured the caliper, did not know what they were doing :o

Kit
Top
cpt black
Tech Rep
Posts: 2906
Joined: Fri Sep 07, 2018 8:28 am
Location: chatham/kent
Has thanked: 15 times
Been thanked: 90 times

Re: Rewinding rear calipers

Post by cpt black » Mon Jul 05, 2021 6:24 pm

Strange, what company refurbed them :?: have you tried a squirt of wd 40 down the
adjuster hole :?:
Top
jrh
Full Member
Posts: 1088
Joined: Thu Sep 20, 2018 3:08 pm
Been thanked: 46 times

Re: Rewinding rear calipers

Post by jrh » Mon Jul 05, 2021 7:25 pm

You shouldn't have been able to take that screw out until you removed a very deep recessed circlip.
Did you do that ?
Top
Micron
Site Admin
Posts: 3547
Joined: Thu Sep 06, 2018 6:08 pm
Location: South Norfolk
Has thanked: 62 times
Been thanked: 96 times

Re: Rewinding rear calipers

Post by Micron » Mon Jul 05, 2021 9:22 pm

jrh wrote: ↑
Mon Jul 05, 2021 7:25 pm
 You shouldn't have been able to take that screw out until you removed a very deep recessed circlip.
Did you do that ?
The Allen screw will come out, if you can get the Allen key to stay in it as you pull it out.

When the screw goes in, is it mating with the worm gear that makes the piston move?
Admin and Owner of this fine club 😎

Location : South Norfolk
Top
Kit
Tech Rep
Posts: 3642
Joined: Fri Sep 07, 2018 8:16 pm
Location: Vange, Basildon
Has thanked: 75 times
Been thanked: 119 times

Re: Rewinding rear calipers

Post by Kit » Mon Jul 05, 2021 9:28 pm

Do you mean
Worm Gear :?:

Kit
Top
cpt black
Tech Rep
Posts: 2906
Joined: Fri Sep 07, 2018 8:28 am
Location: chatham/kent
Has thanked: 15 times
Been thanked: 90 times

Re: Rewinding rear calipers

Post by cpt black » Mon Jul 05, 2021 9:35 pm

yes worm ear has to engage, have you tried old screw in the new cailper ;)
Top
Post Reply

Return to “The Garage - Technical Forum”

Who is online

Users browsing this forum: No registered users and 86 guests