For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
Tott61
- Full Member
- Posts: 171
- Joined: Tue May 11, 2021 7:14 pm
- Been thanked: 5 times
Post
by Tott61 » Thu Jul 01, 2021 3:34 pm
Is it possible to remove the starter motor without going under the car
-
Micron
- Site Admin
- Posts: 3467
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 62 times
- Been thanked: 91 times
Post
by Micron » Thu Jul 01, 2021 4:04 pm
Tott61 wrote: ↑Thu Jul 01, 2021 3:34 pm
Is it possible to remove the starter motor without going under the car
I don't know the answer myself, but asking for the others, is it a 16v or 24v?
Admin and Owner of this fine club
Location : South Norfolk
-
Kit
- Tech Rep
- Posts: 3559
- Joined: Fri Sep 07, 2018 8:16 pm
- Location: Vange, Basildon
- Has thanked: 71 times
- Been thanked: 115 times
Post
by Kit » Thu Jul 01, 2021 5:40 pm
Tott61 wrote: ↑Thu Jul 01, 2021 3:34 pm
Is it possible to remove the starter motor without going under the car
Yes, if it’s an 24v
Kit
-
fanman
- Full Member
- Posts: 152
- Joined: Fri Sep 14, 2018 10:05 am
- Has thanked: 2 times
- Been thanked: 6 times
Post
by fanman » Thu Jul 01, 2021 5:51 pm
Definitely not if its a 16v! Did this some time back - a right old PITA !
-
Incognito
- Full Member
- Posts: 2297
- Joined: Thu Sep 06, 2018 9:27 pm
- Location: Lincoln
- Has thanked: 48 times
- Been thanked: 18 times
Post
by Incognito » Thu Jul 01, 2021 6:10 pm
I'm a complete novice, but did change mine from above no problem, but as said, that's on a 24v.
-
Tott61
- Full Member
- Posts: 171
- Joined: Tue May 11, 2021 7:14 pm
- Been thanked: 5 times
Post
by Tott61 » Thu Jul 01, 2021 6:50 pm
It's a 16v so probably from underneath
-
Kit
- Tech Rep
- Posts: 3559
- Joined: Fri Sep 07, 2018 8:16 pm
- Location: Vange, Basildon
- Has thanked: 71 times
- Been thanked: 115 times
Post
by Kit » Thu Jul 01, 2021 6:55 pm
Tott61 wrote: ↑Thu Jul 01, 2021 6:50 pm
It's a 16v so probably from underneath
Yes, it’s easier if you remove the X-member + there’s a bracket from the back of the engine to IM that needs to came off
Kit
-
Tott61
- Full Member
- Posts: 171
- Joined: Tue May 11, 2021 7:14 pm
- Been thanked: 5 times
Post
by Tott61 » Fri Jul 02, 2021 3:26 pm
Thanks
I really only want to check the terminals on the solenoid mainly the one from the battery which is bolted on. Is it possible to access these from above by removing various parts
-
Kit
- Tech Rep
- Posts: 3559
- Joined: Fri Sep 07, 2018 8:16 pm
- Location: Vange, Basildon
- Has thanked: 71 times
- Been thanked: 115 times
Post
by Kit » Fri Jul 02, 2021 5:32 pm
Tott61 wrote: ↑Fri Jul 02, 2021 3:26 pm
Thanks
I really only want to check the terminals on the solenoid mainly the one from the battery which is bolted on. Is it possible to access these from above by removing various parts
If you tell which model you have
I would be in a better position, to answer your question
Kit
-
Tott61
- Full Member
- Posts: 171
- Joined: Tue May 11, 2021 7:14 pm
- Been thanked: 5 times
Post
by Tott61 » Fri Jul 02, 2021 8:31 pm
Sorry. It is a 2.0 16 v. 1994
Who is online
Users browsing this forum: No registered users and 33 guests
