Dizzy and fuel pump

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
CharlesUK
Full Member
Posts: 106
Joined: Mon Feb 14, 2022 10:55 am
Location: Yeovil, Somerset
Has thanked: 1 time
Been thanked: 3 times

Dizzy and fuel pump

Post by CharlesUK » Tue Feb 22, 2022 6:21 pm

1994
16V
Ford Probe

Had her towed into the garage today. Immobiliser is supposedly fine but distributor still not working nor is fuel pump. Mechanic is really unsure as to why this has happened but said will have a look at dizzy and try to fix it. Have said that due to the immobiliser wires being cut it may as well be scrapped if it’s not an easy fix.

Any ideas on this issue? Fuel pump is intermittent, dizzy works one in a million.

Kit
Tech Rep
Posts: 3559
Joined: Fri Sep 07, 2018 8:16 pm
Location: Vange, Basildon
Has thanked: 71 times
Been thanked: 115 times

Re: Dizzy and fuel pump

Post by Kit » Tue Feb 22, 2022 6:28 pm

The problem here is your mechanic knows nothing about these cars :cry:
Remove the immobiliser as per
https://www.ukpoc.co.uk/forum/viewtopic.php?f=32&t=506

It’s only 3 wires :!:

& your problem should be solved

Kit

CharlesUK
Full Member
Posts: 106
Joined: Mon Feb 14, 2022 10:55 am
Location: Yeovil, Somerset
Has thanked: 1 time
Been thanked: 3 times

Re: Dizzy and fuel pump

Post by CharlesUK » Tue Feb 22, 2022 6:40 pm

Kit wrote:
Tue Feb 22, 2022 6:28 pm
The problem here is your mechanic knows nothing about these cars :cry:
Remove the immobiliser as per
https://www.ukpoc.co.uk/forum/viewtopic.php?f=32&t=506

It’s only 3 wires :!:

& your problem should be solved

Kit
9&11 and 10&13 had already been joined when I got the car. Once the car wouldn’t start I did 15&16 but it still won’t start.
The mechanic said he will rejoin 15&16 and go from there.

Micron
Site Admin
Posts: 3466
Joined: Thu Sep 06, 2018 6:08 pm
Location: South Norfolk
Has thanked: 62 times
Been thanked: 91 times

Re: Dizzy and fuel pump

Post by Micron » Tue Feb 22, 2022 7:11 pm

I would recheck all the wires
Admin and Owner of this fine club 😎

Location : South Norfolk

cpt black
Tech Rep
Posts: 2877
Joined: Fri Sep 07, 2018 8:28 am
Location: chatham/kent
Has thanked: 15 times
Been thanked: 88 times

Re: Dizzy and fuel pump

Post by cpt black » Tue Feb 22, 2022 7:52 pm

Re check the wires,if the immobiliser is by passed you dont need the black box,just kick it
over the garden fence,its easier to link the wires in the plug connections to each other with
1mm insulated wire ;)

jrh
Full Member
Posts: 1057
Joined: Thu Sep 20, 2018 3:08 pm
Been thanked: 44 times

Re: Dizzy and fuel pump

Post by jrh » Tue Feb 22, 2022 10:46 pm

Or, jam the ignition relay hard shut with a matchstick , that keeps immobiliser working as an anti-theft device.
Ok , the red light stays on while engine is running but still blinks when you switch off.
The hard shut relay contacts pass enough current for the ignition circuit.

Micron
Site Admin
Posts: 3466
Joined: Thu Sep 06, 2018 6:08 pm
Location: South Norfolk
Has thanked: 62 times
Been thanked: 91 times

Re: Dizzy and fuel pump

Post by Micron » Tue Feb 22, 2022 10:52 pm

jrh wrote:
Tue Feb 22, 2022 10:46 pm
Or, jam the ignition relay hard shut with a matchstick , that keeps immobiliser working as an anti-theft device.
Ok , the red light stays on while engine is running but still blinks when you switch off.
The hard shut relay contacts pass enough current for the ignition circuit.
Not if the wires have already been cut and joined?
Admin and Owner of this fine club 😎

Location : South Norfolk

jrh
Full Member
Posts: 1057
Joined: Thu Sep 20, 2018 3:08 pm
Been thanked: 44 times

Re: Dizzy and fuel pump

Post by jrh » Wed Feb 23, 2022 8:55 am

That is true , but a 'plug and socket' just seems 'better'.
The real problem was using such a tiny relay in the immobiliser .
They immediately passed the fuel and starter relays in the immobiliser on to much larger units under the bonnet but ,for security reasons , couldn't do the same thing for the ignition circuit . Couple that with components unable to cope with conditions in the distributor and failure was inevitable.

Post Reply

Who is online

Users browsing this forum: No registered users and 27 guests