Probe
2.0 16v
1995 blue
Non-AC model
Hi all,
Planing on getting the thing back on the road next year, one thing I’d really like this winter is the windscreen to receive air from the heater. I’ve got 1-4 working, hot and cold working, however no directional control. Heat/air only pushes to the footwells. I’ve changed the dash switches in hope for a quick fix but no different.
Any ideas?
I summarise that it’s a heater swap out, has anyone done this and if so.. any tips? Also if anyone has a spare blower before I get started that would be great
Cheers, Ryan
No heat
-
Micron
- Site Admin
- Posts: 3559
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 63 times
- Been thanked: 97 times
Re: No heat
If you believe that it's the blower unit, not the actual blower if you are getting different speeds, then you will probably need to remove the dash to get to it. It can be time consuming, because some of the fixings are in awkward places, there is one in the middle of the dash, near the windscreen, plus one either end on the sides.
If you are able I would remove the front seats to give you more room.
To be honest, it's a hard thing to explain, as I'm bound to miss something and you just find them all as you go.
If you are able I would remove the front seats to give you more room.
To be honest, it's a hard thing to explain, as I'm bound to miss something and you just find them all as you go.
Admin and Owner of this fine club 
Location : South Norfolk
Location : South Norfolk
Who is online
Users browsing this forum: No registered users and 72 guests