Bonnet doesn't fit...

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
EmulateDJ
Registered User
Posts: 26
Joined: Tue Jan 18, 2022 10:49 am
Contact:
Contact EmulateDJ

Bonnet doesn't fit...

Post by EmulateDJ » Tue Feb 15, 2022 10:42 am

Wondered if any of you lovely people could provide some insight as to why my bonnet doesn't appear to close properly. I've attached a pic.. its really annoying as it ruins the look of the car completely !!

Driver side headlight seems slightly wonky too... (Looking for US spec headlight covers if anyone has a hook up)

Any advice except "jump on it and bend it in to shape" is accepted :lol:

Image
Top
Incognito
Full Member
Posts: 2296
Joined: Thu Sep 06, 2018 9:27 pm
Location: Lincoln
Has thanked: 48 times
Been thanked: 18 times

Re: Bonnet doesn't fit...

Post by Incognito » Tue Feb 15, 2022 10:59 am

You'll have an incorrect battery fitted. It was to be a specific battery to fit properly under the bonnet.
Top
Incognito
Full Member
Posts: 2296
Joined: Thu Sep 06, 2018 9:27 pm
Location: Lincoln
Has thanked: 48 times
Been thanked: 18 times

Re: Bonnet doesn't fit...

Post by Incognito » Tue Feb 15, 2022 11:07 am

Just checked mine, you need a Numax AM058L.
For confirmation, remove your battery and see if the bonnet closes correctly.
Top
Micron
Site Admin
Posts: 3466
Joined: Thu Sep 06, 2018 6:08 pm
Location: South Norfolk
Has thanked: 62 times
Been thanked: 91 times

Re: Bonnet doesn't fit...

Post by Micron » Tue Feb 15, 2022 11:16 am

What Paul said 100%
Admin and Owner of this fine club 😎

Location : South Norfolk
Top
cpt black
Tech Rep
Posts: 2877
Joined: Fri Sep 07, 2018 8:28 am
Location: chatham/kent
Has thanked: 15 times
Been thanked: 88 times

Re: Bonnet doesn't fit...

Post by cpt black » Tue Feb 15, 2022 11:26 am

As Paul said wrong battery fitted you can get the proper one from Tanya Batteries
as for head light covers you can adjust slightly by the 4 screw bolts holding the
the head light covers on
Top
Kit
Tech Rep
Posts: 3559
Joined: Fri Sep 07, 2018 8:16 pm
Location: Vange, Basildon
Has thanked: 71 times
Been thanked: 115 times

Re: Bonnet doesn't fit...

Post by Kit » Tue Feb 15, 2022 3:49 pm

You can modify the battery tray :idea:

Remove it
Take of the bracket that supports it to the inner wing.
Re-drill the holes for the bolts & re-fix so it’s flush with the inner wing flat bit.
Then reduced the bottom thickness of the battery tray, with an angle grinder, & re-fit

This works for me , but not the ‘purest’ among us :lol: :lol:

Kit
Top
Post Reply

Return to “The Garage - Technical Forum”

Who is online

Users browsing this forum: Bing [Bot] and 31 guests