rear track control arm

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Post Reply
paulinpoole
Full Member
Posts: 194
Joined: Sun Sep 16, 2018 6:16 pm
Location: Poole Dorset
Been thanked: 1 time

rear track control arm

Post by paulinpoole » Sun Oct 18, 2020 6:04 pm

im needing one of these as one of the bolts sheared off :roll: not urgent tho
Is this the correct part for our cars as its a mazda number 0525 GE
ebay item no 193525962653
or has someone got the ford number please
thanks in advance 8-)
Top
mojo98
Tech Rep
Posts: 2679
Joined: Thu Sep 06, 2018 10:52 pm
Location: Billingham
Has thanked: 42 times
Been thanked: 57 times

Re: rear track control arm

Post by mojo98 » Sun Oct 18, 2020 7:54 pm

Paul, are you looking from a trailing arm, (runs back to front) and hand brake cables fasten's to
No 11 trailing arm

Or rear lateral bars (runs from side to side)
No 5 lateral bar
Ford number from trailing arm F32Z5J898A but discontinued


Image
Top
MikeyG
Full Member
Posts: 93
Joined: Thu Nov 29, 2018 6:01 pm
Has thanked: 1 time

Re: rear track control arm

Post by MikeyG » Sun Oct 18, 2020 8:12 pm

All the control arms are interchangeable with the 626 ge right?
Top
paulinpoole
Full Member
Posts: 194
Joined: Sun Sep 16, 2018 6:16 pm
Location: Poole Dorset
Been thanked: 1 time

Re: rear track control arm

Post by paulinpoole » Mon Oct 19, 2020 9:09 pm

MikeyG wrote: ↑
Sun Oct 18, 2020 8:12 pm
 All the control arms are interchangeable with the 626 ge right?
thats what i was thinking :)
Top
paulinpoole
Full Member
Posts: 194
Joined: Sun Sep 16, 2018 6:16 pm
Location: Poole Dorset
Been thanked: 1 time

Re: rear track control arm

Post by paulinpoole » Fri Oct 23, 2020 9:10 pm

mojo98 wrote: ↑
Sun Oct 18, 2020 7:54 pm
 Paul, are you looking from a trailing arm, (runs back to front) and hand brake cables fasten's to
No 11 trailing arm

Or rear lateral bars (runs from side to side)
No 5 lateral bar
Ford number from trailing arm F32Z5J898A but discontinued


Image
malc it is the trailing arm i want,no 11,my boob :?
any idea if this would fit being a mazda GE part ?
thanks 8-)
Top
jrh
Full Member
Posts: 1057
Joined: Thu Sep 20, 2018 3:08 pm
Been thanked: 44 times

Re: rear track control arm

Post by jrh » Sat Oct 24, 2020 8:27 am

Don't throw the old one away !
To remove old bushes , just run a fine hacksaw cut along the 'cylinder' enclosing the bush.
A screwdriver in the gap, prise it open , tap old bush out.
Now you have a choice if you cannot find the proper item.
The cheap items from Latvia have good bushes which can be welded into your old trailing arm.
Top
cpt black
Tech Rep
Posts: 2877
Joined: Fri Sep 07, 2018 8:28 am
Location: chatham/kent
Has thanked: 15 times
Been thanked: 88 times

Re: rear track control arm

Post by cpt black » Sat Oct 24, 2020 9:16 am

When you say bolt sheared off do you mean the bolts that hold the handbrake
cable on to the arm :?: if so just tack weld a m6 bolt on or cable tie on
Top
paulinpoole
Full Member
Posts: 194
Joined: Sun Sep 16, 2018 6:16 pm
Location: Poole Dorset
Been thanked: 1 time

Re: rear track control arm

Post by paulinpoole » Sun Oct 25, 2020 12:15 pm

hiya,yes one of the handbrake bolts sheared off,even tho i wd40 and wire brushed it first :roll:
luckily one is still on there holding cable in place,so yes thanks i will use a cable tie as dont have access to a weld
cheers mate 8-)
Top
Post Reply

Return to “The Garage - Technical Forum”

Who is online

Users browsing this forum: No registered users and 65 guests