Suspension mounts

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
KEG
Registered User
Posts: 68
Joined: Thu Aug 29, 2019 3:38 pm
Has thanked: 4 times

Suspension mounts

Post by KEG » Wed Mar 25, 2020 2:42 pm

Probe failed it’s mot today. Both suspension mounts corroded. Anyone know where there can be obtained?
Probe is 1996, 24V.

Kit
Tech Rep
Posts: 3404
Joined: Fri Sep 07, 2018 8:16 pm
Has thanked: 65 times
Been thanked: 103 times

Re: Suspension mounts

Post by Kit » Wed Mar 25, 2020 2:49 pm

Need a bit more detail, please :idea:
Photos etc

Kit

KEG
Registered User
Posts: 68
Joined: Thu Aug 29, 2019 3:38 pm
Has thanked: 4 times

Re: Suspension mounts

Post by KEG » Wed Mar 25, 2020 2:50 pm

That’s all I know. Garage informed me.

mojo98
Tech Rep
Posts: 2531
Joined: Thu Sep 06, 2018 10:52 pm
Has thanked: 32 times
Been thanked: 51 times

Re: Suspension mounts

Post by mojo98 » Wed Mar 25, 2020 3:46 pm

Front or rear,?

KEG
Registered User
Posts: 68
Joined: Thu Aug 29, 2019 3:38 pm
Has thanked: 4 times

Re: Suspension mounts

Post by KEG » Wed Mar 25, 2020 3:53 pm

Front both sides.

Micron
Site Admin
Posts: 3161
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 52 times
Been thanked: 84 times

Re: Suspension mounts

Post by Micron » Wed Mar 25, 2020 4:06 pm

Duncan is right, pictures will help so much. I believe that it's unusual for the near side to fail, but I guess not impossible?
Admin and Owner of this fine club 😎

KEG
Registered User
Posts: 68
Joined: Thu Aug 29, 2019 3:38 pm
Has thanked: 4 times

Re: Suspension mounts

Post by KEG » Wed Mar 25, 2020 4:33 pm

Why will photos help?

jrh
Full Member
Posts: 959
Joined: Thu Sep 20, 2018 3:08 pm
Been thanked: 36 times

Re: Suspension mounts

Post by jrh » Wed Mar 25, 2020 6:41 pm

It is almost certain you are referring to the bodywork ( or lack of it ) to which the mounts are attached.
A bodywork welding job .

Micron
Site Admin
Posts: 3161
Joined: Thu Sep 06, 2018 6:08 pm
Has thanked: 52 times
Been thanked: 84 times

Re: Suspension mounts

Post by Micron » Wed Mar 25, 2020 6:48 pm

KEG wrote:
Wed Mar 25, 2020 4:33 pm
Why will photos help?
Because as they say, a picture paints a thousand words, and they will give us a better understanding of the problem.
Admin and Owner of this fine club 😎

KEG
Registered User
Posts: 68
Joined: Thu Aug 29, 2019 3:38 pm
Has thanked: 4 times

Re: Suspension mounts

Post by KEG » Wed Mar 25, 2020 8:58 pm

All I know is that the garage is trying to source replacements and nothing was said about any welding etc.

Post Reply

Who is online

Users browsing this forum: No registered users and 36 guests