UKPOC forums

Finally got round to change to whole clock spring on the Lazer, but still have no side lights, new normal blubs fitted (did LEDs in) but no joy.

We can have a look when we are up next if you want?

Have you swapped the side light relay (f) as in the handbook in the engine bay Malc

cpt black wrote: ↑

Sun Mar 31, 2024 12:41 pm

Have you swapped the side light relay (f) as in the handbook in the engine bay Malc

If it doesn't rain tomorrow I'll check that out,
I've got a job on tomorrow changing the inner track rod on the Gold ( very slight movement) due for mot in March

Wiring diagram says Fuse Relay K52 Off / Park / Headlight position switch
That's it.
Select park and the K52 relay is energised. That should feed ALL of the stuff that is NOT working.
Select Headlight , K52 and another relay is energised to feed headlights. .
So , fuse /relay/switch .......

mojo98 wrote: ↑

Sun Mar 31, 2024 6:32 pm

cpt black wrote: ↑

Sun Mar 31, 2024 12:41 pm

Have you swapped the side light relay (f) as in the handbook in the engine bay Malc

If it doesn't rain tomorrow I'll check that out,
I've got a job on tomorrow changing the inner track rod on the Gold ( very slight movement) due for mot in March

Hope you get the inner track rod done Malc

Swapped over the F relay, still no joy, even used the horn relay which definitely works but nothing.


Managed to remove the old inner track rod off the steering rack, but did like the look of the new on I got off Ebay, so contact my local autoparts, but will be Wednesday before here can ring the suppliers. No rush mot later in month

Have you checked the inner fuse box connectors are all tight/ Fuses may be ok
but connector mot making contact behind fuse box

cpt black wrote: ↑

Mon Apr 01, 2024 5:56 pm

Have you checked the inner fuse box connectors are all tight/ Fuses may be ok
but connector mot making contact behind fuse box

Thanks Kev I will have a check.

The headlights are working , so the relay to the park lights , etc should be made , only one set of contacts out to a common distribution point to ALL the other items.
Check for loose connection / spade off / etc.