For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
cpt black
- Tech Rep
- Posts: 2696
- Joined: Fri Sep 07, 2018 8:28 am
- Has thanked: 11 times
- Been thanked: 85 times
Post
by cpt black » Thu Jun 01, 2023 5:15 pm
Was doing a few aerial repairs and testing all going well,radio went off no probs fuse
now the car wont start no clocks etc seems no power to engine headlights etc work all i get is
bleeping the same as you would get if the airbag light has fails in the dash
Any ideas welcome Feel free to comment(should have left alone)
Its early 24v with imobilliser
-
Micron
- Site Admin
- Posts: 3199
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 53 times
- Been thanked: 85 times
Post
by Micron » Thu Jun 01, 2023 5:29 pm
Room fuse maybe
Admin and Owner of this fine club
-
cpt black
- Tech Rep
- Posts: 2696
- Joined: Fri Sep 07, 2018 8:28 am
- Has thanked: 11 times
- Been thanked: 85 times
Post
by cpt black » Thu Jun 01, 2023 6:13 pm
Gone back around again as replaced the room fuse & radio fuse Found room fuse blown again
a bleep of 5 then repeats ,laughing now as not got any spare fuses
Last edited by
cpt black on Fri Jun 02, 2023 7:26 am, edited 1 time in total.
-
Micron
- Site Admin
- Posts: 3199
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 53 times
- Been thanked: 85 times
Post
by Micron » Thu Jun 01, 2023 6:45 pm
When does it bleep?
Admin and Owner of this fine club
-
cpt black
- Tech Rep
- Posts: 2696
- Joined: Fri Sep 07, 2018 8:28 am
- Has thanked: 11 times
- Been thanked: 85 times
Post
by cpt black » Fri Jun 02, 2023 6:15 am
Bleeps when you turn ignition to on,suspect thats because the air bag light does
not illuminate on the pinnacle along with the rest of the lights on the pinnacle
-
Micron
- Site Admin
- Posts: 3199
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 53 times
- Been thanked: 85 times
Post
by Micron » Fri Jun 02, 2023 8:17 am
I will have a look at the Manuals later today
Admin and Owner of this fine club
-
cpt black
- Tech Rep
- Posts: 2696
- Joined: Fri Sep 07, 2018 8:28 am
- Has thanked: 11 times
- Been thanked: 85 times
Post
by cpt black » Fri Jun 02, 2023 9:27 am
Now sorted the loom on the antenna to the connector was faulty
-
Micron
- Site Admin
- Posts: 3199
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 53 times
- Been thanked: 85 times
Post
by Micron » Fri Jun 02, 2023 9:43 am
cpt black wrote: ↑Fri Jun 02, 2023 9:27 am
Now sorted the loom on the antenna to the connector was faulty
oops
Admin and Owner of this fine club
Who is online
Users browsing this forum: No registered users and 42 guests
