NSF indicator issue
-
- Site Admin
- Posts: 3199
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 53 times
- Been thanked: 85 times
NSF indicator issue
On my way home yesterday I noticed that the NSF indicators ( side repeater and front indicator ) stopped working.
I have checked both bulbs and put a meter on the circuit to see if I was getting any voltage, but nothing.
If you look at the attached diagram you will see a common point which is described as Interior Fuse Panel, but not an actual fuse?
The rear indicator works, so my thinking is that it must be an issue at this common point.
My question is where is this common point if it’s not a fuse?
I have checked both bulbs and put a meter on the circuit to see if I was getting any voltage, but nothing.
If you look at the attached diagram you will see a common point which is described as Interior Fuse Panel, but not an actual fuse?
The rear indicator works, so my thinking is that it must be an issue at this common point.
My question is where is this common point if it’s not a fuse?
Admin and Owner of this fine club
-
- Site Admin
- Posts: 3199
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 53 times
- Been thanked: 85 times
Re: NSF indicator issue
I did test the positive feed with a meter straight to the negative and f the battery with the indicator going, but nothing
Admin and Owner of this fine club
-
- Site Admin
- Posts: 3199
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 53 times
- Been thanked: 85 times
Re: NSF indicator issue
Problem resolved, either by luck or intervention?
I pinpointed the Interior Fuse Panel plug to C1, which is at the back of the interior fuse panel strangely enough , I gave it a bit of a waggle and all's good (for now)
I pinpointed the Interior Fuse Panel plug to C1, which is at the back of the interior fuse panel strangely enough , I gave it a bit of a waggle and all's good (for now)
Admin and Owner of this fine club
-
- Tech Rep
- Posts: 3418
- Joined: Fri Sep 07, 2018 8:16 pm
- Has thanked: 67 times
- Been thanked: 106 times
Re: NSF indicator issue
Simple things are always the fixes
My suggest, would have been the earth connections
Kit
-
- Site Admin
- Posts: 3199
- Joined: Thu Sep 06, 2018 6:08 pm
- Has thanked: 53 times
- Been thanked: 85 times
Re: NSF indicator issue
I agree it’s a possibility, but in this case I tested the 12v coming to the lights with a meter between the supply and the negative terminal on the battery which bypasses the earth terminal.
Admin and Owner of this fine club
Who is online
Users browsing this forum: No registered users and 41 guests