UKPOC forums

Thank you - is the thermal fuse code an easy fix / trace.

Sorry for all the Qs on this, it’s the 1st time I’ve gone through all this

The thermal fuse is in the blue box tucked up above the interior fuse box believe theres a right up
how to replace in the oracle section

Thank you, I’ll have a little read

Is it obvious if it’s blown or a case of replace and see?

You can usually see a score mark on the white cover,but not always you can do test for continuity if you have a meter
to test,its a 167c fuse to replace needs soldering in though

Did you get anywhere with this?
Japha started throwing an airbag code 13 at me about a month ago, so I replaced the switch gear this morning. Made no difference!
I'd previously exercised the blue and orange connectors I could get at easily but again, no difference.

Doing a web search, some folk say it's a Crash Data Memory full. Is there a way to empty it? Surely it must be an eprom or maybe an eeprom? Not sure why it should 'fillup', it's not like a drive a million miles a year!

No I've not taken a good look at it yet, I am hoping it is a simple fix though, ie the blue and orange connectors which I just need to find a spare afternoon on to take a look!

Failing that I'll probably take to a local auto electrician I've used in the past when I have changed seats to racing seats or put an aftermarket wheel on without airbag and they have sorted the the dash lights etc...

Can I ask a question regarding Abs light,if not illuminated at start sequence, could this be a supply issue and from where does the abs system get power.
Mick.

Hi Mick
It could just be a blown bulb on your cluster if not registered on start up
power comes from the Blue air bag module tucked up above the interior
fuse box give the connectors a wiggle first

I wonder if this could be part of my Code 13 issue. I have had cause to replace said fuse box and so could have disturbed the air bag module I guess.

Worth a try Kev
Kev