Thank you
Engine Cleaning
-
TrevorH83
- Full Member
- Posts: 170
- Joined: Fri Jul 29, 2022 3:57 pm
- Has thanked: 59 times
- Been thanked: 2 times
Engine Cleaning
So I have given the engine bay a bit of a dry wash and it’s not come up too bad at all. I still want to bring it up a bit more so will give it a bit more detailing but what do people us on the inlet manifold cover / rocker cover to really bring them back to life?
Thank you
Thank you
Re: Engine Cleaning
Cue Malcolm……
There’s a spray on wipe off Autoglym product that people have used in the past, but can’t remember it’s name, engine degreaser or something like that….
There’s a spray on wipe off Autoglym product that people have used in the past, but can’t remember it’s name, engine degreaser or something like that….
-
mojo98
- Tech Rep
- Posts: 2557
- Joined: Thu Sep 06, 2018 10:52 pm
- Has thanked: 39 times
- Been thanked: 51 times
Re: Engine Cleaning
The biggest thing that you shouldn't use is water or steam,
Aprt for autoglym product, I use wd40 a lot in the engine bay, to clean IM, Rocker cover, dizzy,
I use autosol with fine wire wool to polish the IM and Rocker cover,
Autoglm rubber clean, for all the hoses.
You need loads of long brushes with small heads, cotton buds,
I could go on and on
I'm right in the middle of cleaning a engine bay right now ready for this weekend
Aprt for autoglym product, I use wd40 a lot in the engine bay, to clean IM, Rocker cover, dizzy,
I use autosol with fine wire wool to polish the IM and Rocker cover,
Autoglm rubber clean, for all the hoses.
You need loads of long brushes with small heads, cotton buds,
I could go on and on
I'm right in the middle of cleaning a engine bay right now ready for this weekend
-
TrevorH83
- Full Member
- Posts: 170
- Joined: Fri Jul 29, 2022 3:57 pm
- Has thanked: 59 times
- Been thanked: 2 times
Re: Engine Cleaning
mojo98 wrote: ↑Wed Aug 24, 2022 6:02 pmThe biggest thing that you shouldn't use is water or steam,
Aprt for autoglym product, I use wd40 a lot in the engine bay, to clean IM, Rocker cover, dizzy,
I use autosol with fine wire wool to polish the IM and Rocker cover,
Autoglm rubber clean, for all the hoses.
You need loads of long brushes with small heads, cotton buds,
I could go on and on
I'm right in the middle of cleaning a engine bay right now ready for this weekend
Nice one, thank you! It’d be great to see some photos to see what can achieved and what a good finished article looks like!
-
TrevorH83
- Full Member
- Posts: 170
- Joined: Fri Jul 29, 2022 3:57 pm
- Has thanked: 59 times
- Been thanked: 2 times
Re: Engine Cleaning
That looks really smart, good work! Did you fabricate the SS panels at the front yourself?
Is there source for the caps and strut covers etc?
Who is online
Users browsing this forum: No registered users and 32 guests