Page 1 of 1

Flashers

Posted: Fri Apr 08, 2022 8:52 pm
by simps
Can anyone give a part number for a suitable electro if flasher unit, I went to the trouble of swapping my rear lights to LEDs and forgot I’d need to swap out the flasher as well 🙄

Oh yes and where does it live?

And do I need separate indicator and hazard units?

Ta v much

Re: Flashers

Posted: Fri Apr 08, 2022 8:58 pm
by Micron
Your other option is to load the LED with a resistor
Not sure where the flasher unit is located

https://www.vleds.com/insider/post/led- ... ed-vehicle

Re: Flashers

Posted: Fri Apr 08, 2022 10:19 pm
by Incognito
You could just pretend to be a bmw driver :D

Re: Flashers

Posted: Fri Apr 08, 2022 10:29 pm
by Micron
Incognito wrote:
Fri Apr 08, 2022 10:19 pm
You could just pretend to be a bmw driver :D
I see you decided not to say Audi driver 🤔🤣

Re: Flashers

Posted: Sat Apr 09, 2022 5:11 pm
by Incognito
Micron wrote:
Fri Apr 08, 2022 10:29 pm
Incognito wrote:
Fri Apr 08, 2022 10:19 pm
You could just pretend to be a bmw driver :D
I see you decided not to say Audi driver 🤔🤣
:D :lol: :lol: :lol:

Re: Flashers

Posted: Sun Apr 10, 2022 2:07 pm
by simps
Back on topic….

I found a simple mod to avoid hyper flashing when LED indicator bulbs are fitted. You just have to have a bit of a steady hand and be brave 😂

Credit to MX6.com

https://www.mx6.com/threads/led-flasher ... st-2458505

Re: Flashers

Posted: Sun Apr 10, 2022 2:10 pm
by Micron
That link appears to take you to your search results, which one is the answer?

Re: Flashers

Posted: Sun Apr 10, 2022 3:52 pm
by simps
Oops, link fixed 😊

Re: Flashers

Posted: Sun Apr 10, 2022 5:02 pm
by Micron
I would try it on a spare unit.

Re: Flashers

Posted: Sun Apr 10, 2022 5:29 pm
by simps
I did and it worked!

You need to tease the board out of the casing it doesn’t come out with the base and you need some small sharp side cutters, but a good deep breath and away we went