UKPOC forums

Wondered if any of you lovely people could provide some insight as to why my bonnet doesn't appear to close properly. I've attached a pic.. its really annoying as it ruins the look of the car completely !!

Driver side headlight seems slightly wonky too... (Looking for US spec headlight covers if anyone has a hook up)

Any advice except "jump on it and bend it in to shape" is accepted

You'll have an incorrect battery fitted. It was to be a specific battery to fit properly under the bonnet.

Just checked mine, you need a Numax AM058L.
For confirmation, remove your battery and see if the bonnet closes correctly.

What Paul said 100%

As Paul said wrong battery fitted you can get the proper one from Tanya Batteries
as for head light covers you can adjust slightly by the 4 screw bolts holding the
the head light covers on

You can modify the battery tray

Remove it
Take of the bracket that supports it to the inner wing.
Re-drill the holes for the bolts & re-fix so it’s flush with the inner wing flat bit.
Then reduced the bottom thickness of the battery tray, with an angle grinder, & re-fit

This works for me , but not the ‘purest’ among us

Kit