UKPOC forums

1995 Ford Probe 16v.Please could anyone advise me. Car MOT due soon and ABS light on. Looking to buy wheel sensors in advance, in case they are causing the problem, so as to save my only car being off the road for longer than necessary. Are the corresponding mazda part numbers C0014371Y and C0014372Y correct . Autodoc have these available for Mazda MX6 and 626. Thank you.

Check you codes, it should tell you which sensor if any is causing the problem
The wheels sensor may just need cleaning

Have you checked out rockauto prices

https://www.ukpoc.co.uk/forum/viewtopic.php?f=32&t=469

Is the 12v LED a basic one from electrical component shop ?

eric56m wrote: ↑

Thu Oct 28, 2021 1:41 pm

Is the 12v LED a basic one from electrical component shop ?

Yes Eric

Thank you, I'm on my way there now.

That was easier than I thought, coming up with 12.

eric56m wrote: ↑

Thu Oct 28, 2021 6:00 pm

That was easier than I thought, coming up with 12.

LH Front sensor,
Whip the front wheel off, it's held in by 2 12m bolts, should be able to get to the bolts without removing the caliper and discs, just be careful you don't snap them, work them back and forth slowly then remove the sensor and give it a gentle clean, just check the wire while your work inside the wheel arch.

Thanks again, will try tomorrow morning, something new to learn everyyday. Hope it's not raining.

Arthritic back and neck been playing up, so booked in for garage tomorrow.If a new sensor is needed will a 1996 Mx6 registration provide the right details for obtaining it ?