Page 2 of 2
Re: heater resistor for 96 probe
Posted: Fri Feb 21, 2020 4:37 pm
by mojo98
jheath17 wrote: ↑Fri Feb 21, 2020 1:53 pm
Heater resistor fault is that the cause of the heater blower not working in some positions? My blower only works at the minimum and maximum speed.
Yes that's the problem, your fan position 2 & 3 have blown, no4 is a direct feed so always works
1,2,3 are controlled by the resistor
Re: heater resistor for 96 probe
Posted: Fri Feb 21, 2020 6:20 pm
by Slick
Pretty sure I have a couple knocking about, if confirm the right type...
Re: heater resistor for 96 probe
Posted: Thu Mar 05, 2020 4:51 pm
by fuerte
I had the 96 resistor 4 in a line.I bought second hand early resistor 2 by 2 but complete with connector cut off wires below connector.An auto electrician rewrired it in for me so far so good.Also 2 by 2 easier to source if go again.