Does anyone know the size of the copper crush washers we use on the rear brake hose/calipers please.
i bought a metric set from halfrauds and the two sizes that are closest are not quite right
(slightly too big to fit in the shape on the caliper,but fit the banjo bolt perfect)
and getting a very very slight leak,so need to change them
thanks in advance
UNPEELED & RETEALED
copper crush washers
-
- Full Member
- Posts: 131
- Joined: Sun Sep 16, 2018 6:16 pm
Re: copper crush washers
hi kit,
thanks bud
im going down to screwfix first today,b&q or a local car shop
ive got a old one to try to size up,
if i find a good size i will post it up for future reference for us all
thanks bud
im going down to screwfix first today,b&q or a local car shop
ive got a old one to try to size up,
if i find a good size i will post it up for future reference for us all
-
- Full Member
- Posts: 131
- Joined: Sun Sep 16, 2018 6:16 pm
Re: copper crush washers
i measured old washer with a caliper and the size is M10x15x1mm
i got some from ebay and all good
i got some from ebay and all good
Who is online
Users browsing this forum: No registered users and 46 guests