For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
KEG
- Registered User
- Posts: 84
- Joined: Thu Aug 29, 2019 3:38 pm
- Has thanked: 4 times
Post
by KEG » Wed Apr 13, 2022 3:30 pm
![Image]()
Ordered a manifold gasket off eBay and it was the wrong one although the description was for a Probe 24v. Seems I also need two, saw these on eBay and they look like the right ones so I’ve ordered them. Has anyone got these just incase I’m sent the wrong ones again. Thanks,
-
simps
- Moderator
- Posts: 634
- Joined: Fri Nov 22, 2019 12:26 pm
- Has thanked: 7 times
- Been thanked: 18 times
Post
by simps » Wed Apr 13, 2022 3:38 pm
Looks like this….
-
Kit
- Tech Rep
- Posts: 3559
- Joined: Fri Sep 07, 2018 8:16 pm
- Location: Vange, Basildon
- Has thanked: 71 times
- Been thanked: 115 times
Post
by Kit » Wed Apr 13, 2022 3:45 pm
If you have a KLZE engine (very unlikely) you need Square holes in the gaskets
Kit
-
KEG
- Registered User
- Posts: 84
- Joined: Thu Aug 29, 2019 3:38 pm
- Has thanked: 4 times
Post
by KEG » Wed Apr 13, 2022 5:45 pm
So does this part look like the right one? I’ve flipped the image.
-
cpt black
- Tech Rep
- Posts: 2876
- Joined: Fri Sep 07, 2018 8:28 am
- Location: chatham/kent
- Has thanked: 15 times
- Been thanked: 88 times
Post
by cpt black » Thu Apr 14, 2022 9:41 am
Yes the right gaskets for the intake manifold
-
cpt black
- Tech Rep
- Posts: 2876
- Joined: Fri Sep 07, 2018 8:28 am
- Location: chatham/kent
- Has thanked: 15 times
- Been thanked: 88 times
Post
by cpt black » Thu Apr 14, 2022 10:29 am
simps wrote: ↑Wed Apr 13, 2022 3:38 pm
Looks like this….
miss match of early cam cover bolts
-
KEG
- Registered User
- Posts: 84
- Joined: Thu Aug 29, 2019 3:38 pm
- Has thanked: 4 times
Post
by KEG » Thu Apr 14, 2022 11:09 am
I’ve ordered two from EBay and the car reg matches up with the part being sent. Unfortunately on EBay the photo of the part is a descriptive one, and the part you get can be different and so the wrong part. If any one has the right gasket I would appreciate a message as at the moment I’m struggling a bit. I need two.
-
Micron
- Site Admin
- Posts: 3465
- Joined: Thu Sep 06, 2018 6:08 pm
- Location: South Norfolk
- Has thanked: 62 times
- Been thanked: 91 times
Post
by Micron » Thu Apr 14, 2022 4:21 pm
I could be wrong, but are they not the same and you just turn one around?
Admin and Owner of this fine club
Location : South Norfolk
-
KEG
- Registered User
- Posts: 84
- Joined: Thu Aug 29, 2019 3:38 pm
- Has thanked: 4 times
Post
by KEG » Sat Apr 16, 2022 11:17 am
The original one that was sent had a hole missing on the right hand side, down the bottom. I’ve received another two which look more promising. Seem to be made out of a polymer or something. More substantial than the first one I received and had to send back.
-
simps
- Moderator
- Posts: 634
- Joined: Fri Nov 22, 2019 12:26 pm
- Has thanked: 7 times
- Been thanked: 18 times
Post
by simps » Sat Apr 16, 2022 5:16 pm
cpt black wrote: ↑Thu Apr 14, 2022 10:29 am
simps wrote: ↑Wed Apr 13, 2022 3:38 pm
Looks like this….
miss match of early cam cover bolts
Interesting they are the ones that came off, is there a significant difference?
Who is online
Users browsing this forum: No registered users and 13 guests
