Air bag code 51

For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
Micron
Site Admin
Posts: 3531
Joined: Thu Sep 06, 2018 6:08 pm
Location: South Norfolk
Has thanked: 62 times
Been thanked: 96 times

Re: Air bag code 51

Post by Micron » Wed Jul 23, 2025 8:34 am

For a whole £10 you can become a full member for 1 year and read this topic on how to replace the thermal fuse

https://www.ukpoc.co.uk/forum/viewtopic ... f6fce89690

Full membership here
https://www.ukpoc.co.uk/forum/viewtopic.php?f=33&t=413

8-) 8-)
Admin and Owner of this fine club 😎

Location : South Norfolk

CharlesUK
Full Member
Posts: 117
Joined: Mon Feb 14, 2022 10:55 am
Location: Yeovil, Somerset
Has thanked: 2 times
Been thanked: 4 times

Re: Air bag code 51

Post by CharlesUK » Wed Jul 23, 2025 12:53 pm

I have previously used a breakout fuse wired in place of rear wiper fuse, wire into cheap circuit timer and then a t5 bulb holder, airbag light comes on at ignition and after a few seconds goes out.

Trism
Registered User
Posts: 27
Joined: Fri Jun 17, 2022 1:31 pm
Has thanked: 1 time
Been thanked: 3 times

Re: Air bag code 51

Post by Trism » Fri Jul 25, 2025 11:45 am

Ok if you have a chipped key car you can run a small wire from the back of the bulb from the ‘key’ bulb to the airbag bulb and it comes on once on startup as it should do

Air bag module beeps so just unsolder (or snap off) the piezo beeper, and now looks all good

Kit
Tech Rep
Posts: 3628
Joined: Fri Sep 07, 2018 8:16 pm
Location: Vange, Basildon
Has thanked: 75 times
Been thanked: 118 times

Re: Air bag code 51

Post by Kit » Fri Jul 25, 2025 9:11 pm

Trism wrote:
Fri Jul 25, 2025 11:45 am
Ok if you have a chipped key car you can run a small wire from the back of the bulb from the ‘key’ bulb to the airbag bulb and it comes on once on startup as it should do

Air bag module beeps so just unsolder (or snap off) the piezo beeper, and now looks all good
Please do a full write up with photos, send it to admin, so it can posted in the Oracle, so it would would help other members whom have this issue

Kit

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 40 guests