For all technical questions. VIEWABLE without login, you need to register (free) to be able to post a question.
-
Bikergonebald
- Registered User
- Posts: 52
- Joined: Sun Mar 24, 2019 7:42 pm
Post
by Bikergonebald » Fri Apr 17, 2020 7:40 pm
Hi guys,
I’m thinking about replacing all rear suspension bushes and cleaning up and painting the various parts but I’ve seen on eBay you can buy all of the different control rods with bushes fitted and they’re quite cheap.
Has anyone tried them or seen them? I’m wondering what the quality is like. Also I would like to keep my car as original as possible so if the look different I might do better to buy some good quality bushes (where from?) and keep my own parts.
Any suggestions gratefully received
Thanks.
Kevin
Owner of a 1992 Mazda MX-6 Auto, 2001 Jaguar XK8 and 1982 Honda CB900c.
Sorry guys I don’t have a probe (yet
) I’m asking questions here because I get better responses than on the US Mazda forum.
-
mojo98
- Tech Rep
- Posts: 2678
- Joined: Thu Sep 06, 2018 10:52 pm
- Location: Billingham
- Has thanked: 42 times
- Been thanked: 57 times
Post
by mojo98 » Fri Apr 17, 2020 8:36 pm
I believe JRH bought some from ebay (think they came for Germany) and did not fit correctly,
I bought some trails arm from rockauto
, might be more expensive but I wouldn't buy from Germany or Latvia
-
jrh
- Full Member
- Posts: 1056
- Joined: Thu Sep 20, 2018 3:08 pm
- Been thanked: 44 times
Post
by jrh » Fri Apr 17, 2020 10:32 pm
Yes, that is correct.
The 'front' tubular struts are 10mm short.
Who is online
Users browsing this forum: No registered users and 15 guests
, might be more expensive but I wouldn't buy from Germany or Latvia