And lastly , everyone needs to know this.
IF you over-tighten the screws that hold the tensioner in place and it snaps off in the engine block , I have the only piece of kit IN THE WORLD ,
that will allow you to remove the piece left in the hole.........without removing the engine.
Remember.
Search found 356 matches
- Tue May 31, 2022 8:06 pm
- Forum: The Garage - Technical Forum
- Topic: Timing Belt and water pump replacement
- Replies: 22
- Views: 14908
- Fri May 27, 2022 8:51 am
- Forum: The Garage - Technical Forum
- Topic: Timing Belt and water pump replacement
- Replies: 22
- Views: 14908
Re: Timing Belt and water pump replacement
Check that the tensioner is working ,or all the work will be for nothing.
- Thu May 19, 2022 10:38 am
- Forum: The Garage - Technical Forum
- Topic: Battery tray
- Replies: 9
- Views: 5298
Re: Battery tray
This was my first 'mod' to the dear old Probe , just so that a standard -075 battery would fit without the terminal problem. Basically , you make a flat platform out of aluminium plate to replace the plastic tray. This drops the battery enough to prevent problems. I sent the detailed drawing to Paul...
- Thu May 12, 2022 6:47 pm
- Forum: The Garage - Technical Forum
- Topic: Immobiliser
- Replies: 25
- Views: 18352
Re: Immobiliser
Curiosity would have me take the lid off that and look inside.
It is just a coil with a pair of really heavy contacts , something must be badly wrong for that one to fail.
I have a good spare if you need another.
It is just a coil with a pair of really heavy contacts , something must be badly wrong for that one to fail.
I have a good spare if you need another.
- Thu May 12, 2022 12:19 pm
- Forum: The Garage - Technical Forum
- Topic: Immobiliser
- Replies: 25
- Views: 18352
Re: Immobiliser
Just a little clarification on what you have done to get it working. I think you have replaced relay K51, the relay that feeds power to the Power Control Module , everything 'engine ' needs that , to work. The ignition circuit needs that AND a separate , very secure circuit , with no easily accessib...
- Mon May 09, 2022 7:35 pm
- Forum: The Garage - Technical Forum
- Topic: Immobiliser
- Replies: 25
- Views: 18352
Re: Immobiliser
If it is running that is good news .
A bit odd that the IGN relay didn't work , they are normally never fail items....................
Main thing is , you solved it, well done.
A bit odd that the IGN relay didn't work , they are normally never fail items....................
Main thing is , you solved it, well done.
- Mon May 09, 2022 10:06 am
- Forum: The Garage - Technical Forum
- Topic: Immobiliser
- Replies: 25
- Views: 18352
Re: Immobiliser
As Sunfly , if the starter motor turns then it is most UNLIKELY there is anything wrong with the Temic or Immobiliser unit. So , it is either that cps connection OR the distributor. Just be very careful NOT to have any spark plug unconnected to earth when you check for a spark. Open circuits in the ...
- Sun May 08, 2022 7:03 pm
- Forum: The Garage - Technical Forum
- Topic: Immobiliser
- Replies: 25
- Views: 18352
Re: Immobiliser
Ah , I see.
First step.
Does the starter motor work ?
If it does , then the key to immobiliser components are working.
Yes/ No ?
First step.
Does the starter motor work ?
If it does , then the key to immobiliser components are working.
Yes/ No ?
- Sun May 08, 2022 11:36 am
- Forum: The Garage - Technical Forum
- Topic: Immobiliser
- Replies: 25
- Views: 18352
Re: Immobiliser
Do you have a proper set of electrical circuit diagrams or are you just using the Owners Handbook to guess the components at fault ?
- Tue May 03, 2022 11:05 am
- Forum: The Garage - Technical Forum
- Topic: Cambelt Pullys 24V
- Replies: 12
- Views: 7287
Re: Cambelt Pullys 24V
Why are you having all this work done at 19k miles ? What makes you think 'something' will go wrong if you don't have it done ? I can assure you the original cambelt will last for well over 100.000 miles without a problem , stability of the polymers too. indefinite. The carbon fibre in the Denso bel...