Could be the alternator taking power form the starter motor try jumping the car
with some leads
Search found 635 matches
- Mon Dec 17, 2018 3:11 pm
- Forum: The Garage - Technical Forum
- Topic: Won't start..
- Replies: 82
- Views: 159263
- Sat Dec 15, 2018 6:26 am
- Forum: The Garage - Technical Forum
- Topic: Won't start..
- Replies: 82
- Views: 159263
Re: Won't start..
If a 2.5 check the Grey CPS plug by the top of the
dipstick
dipstick
- Tue Dec 11, 2018 4:48 pm
- Forum: The Garage - Technical Forum
- Topic: Power steering issues
- Replies: 18
- Views: 40321
Re: Power steering issues
You have the Tensioner mate of Boysie bring it down at the weekened
and will fit for you ,Believe we discussed it at the breaker day if i recall
and will replace with new bearing as well
and will fit for you ,Believe we discussed it at the breaker day if i recall
and will replace with new bearing as well
- Tue Dec 11, 2018 4:02 pm
- Forum: The Garage - Technical Forum
- Topic: Power steering issues
- Replies: 18
- Views: 40321
Re: Power steering issues
Top up with some fresh fluid and check the belt tensioner
mate
mate
- Sun Nov 25, 2018 7:24 am
- Forum: The Garage - Technical Forum
- Topic: VRIS issues
- Replies: 10
- Views: 22546
Re: VRIS issues
Hi Gav,could be a cracked pipe under the Intake manifold from the vaccum chamber
My Vris 1 doesn,t work but engine works A1 with no problems,you could try changing
the plug over from Vris 2 to Vris1 to check
My Vris 1 doesn,t work but engine works A1 with no problems,you could try changing
the plug over from Vris 2 to Vris1 to check
- Wed Nov 21, 2018 6:35 pm
- Forum: The Garage - Technical Forum
- Topic: Heater fan
- Replies: 5
- Views: 13909
Re: Heater fan
You will need a new heater resistor card,located left hand side below the glove box(IN FAN UNIT)
there is 2 types early/late
4 pin in block early
4 pin in line late
there is 2 types early/late
4 pin in block early
4 pin in line late
- Mon Nov 19, 2018 4:14 pm
- Forum: The Garage - Technical Forum
- Topic: Coolant cap
- Replies: 6
- Views: 15559
Re: Coolant cap
Spring cap on both sides is ok
- Mon Nov 12, 2018 6:48 pm
- Forum: The Garage - Technical Forum
- Topic: Locks, ignition barrels and immobilisers....
- Replies: 15
- Views: 36773
Re: Locks, ignition barrels and immobilisers....
Check the mobby bypass (bosch) unit under the centre consul clock
as wires maybe loose,as for the boot lock as Mal said, but have a look at
your key does it look like it takes a battery as you may have a early/late
car any numbers on the dissy
as wires maybe loose,as for the boot lock as Mal said, but have a look at
your key does it look like it takes a battery as you may have a early/late
car any numbers on the dissy
- Sun Nov 04, 2018 7:38 pm
- Forum: The Garage - Technical Forum
- Topic: V6 removal of the speed sensor on the gear box?
- Replies: 11
- Views: 28310
Re: V6 removal of the speed sensor on the gear box?
Best practice always wins If anyone needs another remeber 16v/24v are different
- Sat Oct 27, 2018 10:27 am
- Forum: The Garage - Technical Forum
- Topic: Optimum oil fill level
- Replies: 6
- Views: 14705
Re: Optimum oil fill level
This goes back years ago/left/right hand engines due to engine wear
just keep it topped up your be fine we all own them +/-mm/4mm
does it make a difference
just keep it topped up your be fine we all own them +/-mm/4mm
does it make a difference