UKPOC forums

First, does the speedometer work , all the time ?
Not a stupid question , the speedo' and cruise control work off the same item.

Hmmm, personally ,I would stay away from oils that contain 'magic' ingredients.
As others have said, good quality semi-synthetic ,5W-30 perfect ( never worry about lots of thin oil sloshing about ), change often, never fill more than 5mm above full mark.

What do you think this is, the Aston Martin club ?

Don't we know it +++.
My concern is, you would do all the work then find another one starts 'tapping' !
Perhaps a few oil changes using flushing oil before doing the job is worth a try ?

Find an old cycle inner tube. Take the coolant cap off and pull that rubber 'washer' away from the centre spigot. Cut a same size diameter washer from the inner tube rubber. Punch a 5mm dia hole in the centre of the washer. Now, stretch the centre hole over that centre location spigot left in the ca...

Oh Bob, this is like watching someone standing on the parapet of a bridge preparing to jump.
My advice ?
Don't.

Good to know, thanks.
I can imagine trying to get it out on the car is more difficult.
Is access only possible from underneath the car , or can it be done from the top ?

Thanks to Wayne for the gearbox.
Off the car, the VSS sensor just pulled out, no problem.
This is the direct opposite of what all the 'scrap yards' told me, " impossible to get out", etc.
Has anyone else ever had to change one, or is it just my high mileage that revealed the problem ?

Costs at least three times as much but, MAZDA belts will last 100...120,000 miles. Forget 60,000, that is way too soon.

4mm MAXIMUM above the F is ok just, 4mm below the F is time to add some more oil , QUICK.
I don't need to tell you the Probe can hurt you if you ignore oil levels.

UKPOC forums

Search found 359 matches

Re: Cruise Control

Re: Service Time!

Re: Coolant cap

Re: Tappet Rattle - a dummy run.

Re: Coolant cap

Re: Tappet Rattle - a dummy run.

Re: V6 removal of the speed sensor on the gear box?

Re: V6 removal of the speed sensor on the gear box?

Re: Suggested suppliers

Re: Optimum oil fill level