Search found 425 matches

Go to advanced search

by mojo98
Tue Oct 16, 2018 3:10 pm
Forum: The Garage - Technical Forum
Topic: High idle
Replies: 14
Views: 30809

Re: High idle

Cheers Mojo. Coolant and oil were topped up yesterday. Me and Paul Seymore also changed alternator belt as it had snapped. I have OBD2 but believe these dont work on older cars. Is there a obd1 socket on it or is it a pedal sequence set up next to the battery is the diagnostic box, need a jumper wi...
by mojo98
Tue Oct 16, 2018 10:51 am
Forum: The Garage - Technical Forum
Topic: High idle
Replies: 14
Views: 30809

Re: High idle

Start with Coolant levels,
second check the codes,
by mojo98
Sun Oct 14, 2018 7:38 pm
Forum: The Garage - Technical Forum
Topic: Sunroof leaking
Replies: 13
Views: 29847

Re: Sunroof leaking

Hi, on each corner of the sonroof`s there are drain tubes, sound like your drives side is blocked,
runs from corner of sunroof to inside the driver wing, and if like me, you will extend them so it drains below the drivers wing, to help prevent your base of the wing rusting
by mojo98
Sun Oct 14, 2018 7:33 pm
Forum: The Garage - Technical Forum
Topic: Rocker cover gaskets Again!
Replies: 7
Views: 17379

Re: Rocker cover gaskets Again!

I`ll add to micron`s comment`s RTV sealant to both faces, and did you leave the car for at least 24hrs before running it, I`ve done mine (front and back) and on 2 of the probe`s and have been fine, fastened them to the right pressure, yes run fine :lol: , but like most cars on the road these day`s h...
by mojo98
Sat Oct 13, 2018 1:05 pm
Forum: The Garage - Technical Forum
Topic: Probe ABS module V6
Replies: 2
Views: 8558

Re: Probe ABS module V6

its behind you rear passenger side panel (speaker panel)
by mojo98
Sat Oct 13, 2018 1:03 pm
Forum: The Garage - Technical Forum
Topic: Driver shaft on drivers side
Replies: 12
Views: 27640

Re: Driver shaft on drivers side

Lee after speaking to you on the phone, sounds like it could be the Intermediate shaft bearing, checked my stock and I don't have one that is a 2 bolt fixing, ;) just 3 bolt fixing,
by mojo98
Tue Oct 09, 2018 12:11 pm
Forum: The Garage - Technical Forum
Topic: Tappet rattle
Replies: 13
Views: 30108

Re: Tappet rattle

Just a thought, are you sure its the HLA`s or is it be the timing belt hydraulic pin adjuster, known it happen before, noisy when low revs but ok under load, we will get the opportunity later this month to listen to it :D
by mojo98
Wed Oct 03, 2018 8:24 pm
Forum: The Garage - Technical Forum
Topic: Under bonnet light
Replies: 2
Views: 8616

Re: Under bonnet light

Yes early probe`s fitted with them but like Aaron says loads unplugged then, or took the bulb out like mine is, known to flatten battery if fault switch
by mojo98
Tue Oct 02, 2018 9:43 am
Forum: The Garage - Technical Forum
Topic: Cam cover gaskets.
Replies: 8
Views: 18435

Re: Cam cover gaskets.

Hiya. My probe 24v will not behave. Went to change the spark plugs and leads to find oil in 4 of the 6 spark plug holes. Can anyone recommend a good brand to use as a few on rock auto? Has anyone got the how to guide that was on Oracle? Many thanks 4 out of 6 means that both cover gaskets will need...
by mojo98
Sat Sep 29, 2018 9:43 am
Forum: The Garage - Technical Forum
Topic: car cranks but won't start
Replies: 10
Views: 29285

Re: car cranks but won't start

sound like the dizzy has failed (no spark) what year is the car (two types of dizzy)

Go to advanced search