Search found 681 matches
- Wed Oct 31, 2018 3:02 pm
- Forum: The Garage - Technical Forum
- Topic: Airbag light flashing
- Replies: 4
- Views: 11796
Re: Airbag light flashing
32 -- drivers airbag, high resistance or open circuit -- wiring, spiral cable, safing sensor, drivers airbag
- Thu Oct 25, 2018 9:41 pm
- Forum: The Garage - Technical Forum
- Topic: Inner CV joint boot split
- Replies: 8
- Views: 18269
Re: Inner CV joint boot split
It's fine to post links etc if it helps someone elseAlan8086 wrote: ↑Thu Oct 25, 2018 9:20 pmJ&R CV Joints on eBay Uk
https://www.ebay.co.uk/itm/132219508235 ... 1ec8e5960b
- Thu Oct 25, 2018 1:18 pm
- Forum: The Garage - Technical Forum
- Topic: Inner CV joint boot split
- Replies: 8
- Views: 18269
Re: Inner CV joint boot split
if you can find a reg for a Mazda MX6 (ebay or autotrader etc) go to a Mazda dealer and ask them,they should be able to help
- Fri Oct 19, 2018 9:48 pm
- Forum: The Garage - Technical Forum
- Topic: Driver shaft on drivers side
- Replies: 12
- Views: 26634
- Sun Oct 14, 2018 7:04 pm
- Forum: The Garage - Technical Forum
- Topic: Rocker cover gaskets Again!
- Replies: 7
- Views: 16198
Re: Rocker cover gaskets Again!
Hi,
Did you use a RTV sealant when you replaced the gaskets?
Did you tighten the cover correctly, and not over tighten it?
Maybe it might be an idea to replace the rocker cover as well, as it might e out of alinement?
As for can you get these running smoothly, in a word "yes"
Did you use a RTV sealant when you replaced the gaskets?
Did you tighten the cover correctly, and not over tighten it?
Maybe it might be an idea to replace the rocker cover as well, as it might e out of alinement?
As for can you get these running smoothly, in a word "yes"
- Sun Oct 14, 2018 9:18 am
- Forum: The Garage - Technical Forum
- Topic: V6 head removal bolt socket???
- Replies: 2
- Views: 8423
Re: V6 head removal bolt socket???
What what you have described it sounds like a Torqox or however you spell it?
- Tue Oct 09, 2018 2:56 pm
- Forum: The Garage - Technical Forum
- Topic: **URGENT** - Car won't start and currently stuck at work
- Replies: 9
- Views: 19804
Re: **URGENT** - Car won't start and currently stuck at work
As said about the CPS, or worse case is your Dizzy has failed
- Mon Oct 01, 2018 1:28 pm
- Forum: The Garage - Technical Forum
- Topic: Flywheel weight reduction???
- Replies: 8
- Views: 18622
Re: Flywheel weight reduction???
If I remember Bob's reply correctly, you have to do a lots of other stuff before you notice any real difference from doing anything with the flywheel, plus I don't think that it's going to make it a performance car!
- Sat Sep 29, 2018 12:48 pm
- Forum: The Garage - Technical Forum
- Topic: car cranks but won't start
- Replies: 10
- Views: 26891
Re: car cranks but won't start
It sounds like the immobiliser has already been removed, if there are just some wires, hopefully they have been connected together correctly and still have good contact. It might pay to check the joints?
I also agree with Malcolm about the dizzy being faulty.
I also agree with Malcolm about the dizzy being faulty.
- Tue Sep 25, 2018 10:35 am
- Forum: The Garage - Technical Forum
- Topic: Shock absorbers and springs
- Replies: 23
- Views: 48283
Re: Shock absorbers and springs
Steve, Are you looking for new? If you are look on eBay under Mazda 626GE, as they are the same as a Ford Probe, most are in Europe or surrounding countries, and prices are not too bad. Your other option is RockAutos in the US, they have lots of choice, but you need to factor in delivery costs and i...