Search found 32 matches

by paulinpoole
Sun Sep 01, 2019 8:09 pm
Forum: The Garage - Technical Forum
Topic: dizzy swap
Replies: 4
Views: 2602

dizzy swap

hi all after forking out all that money for my respray the engine is now complaining :( ive got another nasty sound coming from under the r/h side of rocker cover (by no 4 cylinder) or possibly from the dizzy (bearings inside it),not too sure yet untill i take it out. so a question for a techy :) i ...
by paulinpoole
Mon Aug 19, 2019 7:46 pm
Forum: The Garage - Technical Forum
Topic: windscreen washer warning light
Replies: 5
Views: 2782

Re: windscreen washer warning light

Slick wrote:
Mon Aug 19, 2019 1:50 pm
I just removed the bulb from the dash cluster 😂

Why doesn't that surprise me :lol: :lol: :lol:
ive been known to remove bulbs too mate
sometimes its a must :lol: :lol:
by paulinpoole
Mon Aug 19, 2019 7:45 pm
Forum: The Garage - Technical Forum
Topic: windscreen washer warning light
Replies: 5
Views: 2782

Re: windscreen washer warning light

cool guys thanks a lot :D
doesn't sound a bad job,will take a looksy tomorrow 8-)
8-) 8-)
by paulinpoole
Sun Aug 18, 2019 9:11 pm
Forum: The Garage - Technical Forum
Topic: windscreen washer warning light
Replies: 5
Views: 2782

windscreen washer warning light

As above,my warning light has come on,so i topped up both reservoir and the light is still on
where will i find the sensor/switch that illuminates the light ?
thanks 8-)

UNPEELED & RETEALED ;)
by paulinpoole
Sun Aug 11, 2019 8:48 pm
Forum: The Garage - Technical Forum
Topic: copper crush washers
Replies: 3
Views: 1890

Re: copper crush washers

i measured old washer with a caliper and the size is M10x15x1mm
i got some from ebay and all good 8-)
by paulinpoole
Sun Aug 11, 2019 8:45 pm
Forum: The Garage - Technical Forum
Topic: Central locking not working
Replies: 3
Views: 2057

Re: Central locking not working

i had the same thing once and the actuator wasnt quite clicked on properly onto the back of the lock barrel
by paulinpoole
Mon Aug 05, 2019 10:11 am
Forum: The Garage - Technical Forum
Topic: copper crush washers
Replies: 3
Views: 1890

Re: copper crush washers

hi kit,
thanks bud :)
im going down to screwfix first today,b&q or a local car shop
ive got a old one to try to size up,
if i find a good size i will post it up for future reference for us all 8-)
by paulinpoole
Sat Aug 03, 2019 9:39 am
Forum: The Garage - Technical Forum
Topic: copper crush washers
Replies: 3
Views: 1890

copper crush washers

Does anyone know the size of the copper crush washers we use on the rear brake hose/calipers please. i bought a metric set from halfrauds and the two sizes that are closest are not quite right (slightly too big to fit in the shape on the caliper,but fit the banjo bolt perfect) and getting a very ver...
by paulinpoole
Mon Jul 29, 2019 9:16 pm
Forum: The Garage - Technical Forum
Topic: 16v idle speed adjustment
Replies: 4
Views: 2438

Re: 16v idle speed adjustment

if you look at the throttlebody standing on the passengerside of car,you will see a deepish hole with a large (approx 10mm) slotted screw in the hole turn one way to increase other to decrease revs,that failing possibly the tps or timing needs adjustment https://www.youtube.com/watch?v=f_VQacbOhhg 3...
by paulinpoole
Fri Jul 19, 2019 9:37 pm
Forum: The Garage - Technical Forum
Topic: bulb number
Replies: 2
Views: 1717

Re: bulb number

thanks mate will check out ebay 8-)

UNPEELED & RESEALED ;)