UKPOC forums

The rear brake will always fail-safe , ie work. Problem will occur when you release the handbrake . It won't. Because the little shaft seal leaks , allowing water/sallt to corrode ,etc. THAT IS WHY YOU NEED THE........................DENSO tape . and that`s why I`ve bought two rolls of Denso tape e...

fanman wrote: ↑
Wed May 22, 2024 10:54 pm
Perfick!!!! Just what I needed !
Thanks so much - really appreciate you taking time to get this for me

No Problems at all, that`s what this club is about, helping each other

Here is a page from my ford probe mtce manual

hope this helps

I believe that your car is a crossover M Reg, coloured mirrors, and late wheel, so it should be a S3 Dizzy,
Have you checked the water level, it sound silly be MrP played up when level down (small leak on small pipe near dizzy)

I have two of mine that do that, just last week my gold 24v wouldn't fire on its 1st attempt, straight away I unplug the cps Plug, and away it fired, can't say why but if mine don't fire at the 1st attempt I going to the cps plug, It's not that you need a new cps, my lazer started doing this back in...

Have you swapped the side light relay (f) as in the handbook in the engine bay Malc If it doesn't rain tomorrow I'll check that out, I've got a job on tomorrow changing the inner track rod on the Gold ( very slight movement) due for mot in March Hope you get the inner track rod done Malc Manage to ...

cpt black wrote: ↑
Mon Apr 01, 2024 5:56 pm
Have you checked the inner fuse box connectors are all tight/ Fuses may be ok
but connector mot making contact behind fuse box

Thanks Kev I will have a check.

Swapped over the F relay, still no joy, even used the horn relay which definitely works but nothing. Managed to remove the old inner track rod off the steering rack, but did like the look of the new on I got off Ebay, so contact my local autoparts, but will be Wednesday before here can ring the supp...

cpt black wrote: ↑
Sun Mar 31, 2024 12:41 pm
Have you swapped the side light relay (f) as in the handbook in the engine bay Malc

If it doesn't rain tomorrow I'll check that out,
I've got a job on tomorrow changing the inner track rod on the Gold ( very slight movement) due for mot in March

Finally got round to change to whole clock spring on the Lazer, but still have no side lights, new normal blubs fitted (did LEDs in) but no joy.

UKPOC forums

Search found 423 matches

Re: Rear calliper/handbrake rebuild

Re: Camber Caster specs

Re: Camber Caster specs

Re: 16v Probe not idling, stalls instead

Re: No start.

Re: Side lights

Re: Side lights

Re: Side lights

Re: Side lights

Re: Side lights