UKPOC forums

That arrangement still looks strange to me, but maybe it's just a different manufacture?
When I can and If I remember, i will try to look at some of mine

Hopefully it's sorted now

Maybe the nut should be fitted into the piston, which would allow the piston to be screwed on to the post in the body?

I am still at a slight loss in respect to the nut, when you look at the piston, is there a threaded part which the that shaft in your drawing will screw into, because all I ever remember in the body is a circlip, which can be a pain to get out, but has to be removed to renewal the seals, unless your...

I have to admit that it's not the best picture to see what you are referring to! From what I can remember, I don't remember the nut you are talking about, from what I can remember, you fight with the seals and pistons, then once pushed in by hand, it should meeting the shaft in the centre, which you...

Winding back, or you risk breaking the mechanism Ooo ok.. I did push back one side so I’ll cross my fingers. One last thing before I’m all set… do you know what size winder I need? Hard to believe my 8 SIDED one doesn’t fit Thanks :) You need an Allen key ( not sure of the size) that fits in to the...

Winding back, or you risk breaking the mechanism

Only an Oriental mind could have designed the rear brake assembly. Work or fail is entirely down to the condition of the lip seal around that shaft connected to the handbrake cable. Here it comes Trev. You need to pack your strip of ..............DENSO tape round that shaft to give the lip seal a f...

The piston is wound in and out, by means of the adjuster, which is accessed via the small bolt on the back (12mm head), use an Allen Key to make the adjustments. If you put in the Allen Key and it does nothing, then check that it's actually in there. As for final adjustment, different people have di...

It could be the actual Crank Position Sensor that is faulty.
There is a yeast you can do, which escapes me at present

Kit wrote: ↑
Sun Apr 21, 2024 7:11 pm
It's a cross over with an S3 dizzy

Kit

It was only a guess.

UKPOC forums

Search found 690 matches

Re: Rear calliper/handbrake rebuild

Re: Rear calliper/handbrake rebuild

Re: Rear calliper/handbrake rebuild

Re: Rear calliper/handbrake rebuild

Re: Rear calliper/handbrake rebuild

Re: Rear calliper/handbrake rebuild

Re: Rear calliper/handbrake rebuild

Re: Rear calliper/handbrake rebuild

Re: no start 2.5 24v 1994

Re: 16v Probe not idling, stalls instead