UKPOC forums

What grade and make of oil.

With a temic normal operation is it will start, then check the key, if the key check fails the engine shuts down.

Crank position sensor I a probable cause. Disconnect the plug by the crank pulley, clean it and reconnect. Then try starting it.

Checking the codes would be a good starting point.

Ethanol attracts water, this is the big problem, thought our plastic tanks will be fine. The fact ethanol combines with water is one way to remove it, add water and float off the water ethanol mix, practice for motorbikes, but not cars. Premium fuel will be staying at E5, though at the moment it is ...

Kit wrote: ↑
Thu Jun 03, 2021 10:32 pm
I’ll have a look on Saturday, if that’s any good

Kit

Excellent.

I can’t remember which plug is which. Manifold refitted and need to know which plug is vris1. Any ideas?

Kit wrote: ↑
Wed May 19, 2021 1:29 pm
In the state, many Probe owners, blank the EGR off

Kit

Mine is for show only, gasket replaced with solid copper gasket. Code 16 is blanked out in my ecu too.

Right hand side looking from the front, bolted to the rear head. Round, about 3inches across, an electrical connector, a vacuum line and a coolant hose connected to it.

There is also a solenoid involved. Usual problems with them, broken nipple or brittle pipe work. The valve itself can jam up with carbon.

The valve and sensor are on the back of the engine on the left side, actually the cylinder head, so at the top.

Just checked the mot and it says front to back and above rear crossmember. Will check when I get the car out of storage.

Cheers Duncan.

UKPOC forums

Search found 25 matches

Re: Wynns Hydraulic Valve Lifter Treatment

Re: oh wot fun 95 temic system new key

Re: Bad news at the pump

Re: VRIS Plugs.

VRIS Plugs.

Re: Code 16 EGR

Re: Code 16 EGR

Re: Code 16 EGR

Re: Code 16 EGR

Re: Corroded Fuel Pipes 24V.