Page 1 of 1
ABS fault
Posted: Mon Jun 09, 2025 6:09 pm
by milnes
Hi all, I have an ABS fault light on my dash. Wired up the diagnostic, correctly. Turn on the ignition and the diagnostic light stays on for 2-3 seconds then goes off with no light flashing sequence.
I've attached a photo of my diagnostic setup, let me know if incorrect and that's why it's not showing a fault?
Re: ABS fault
Posted: Wed Jun 11, 2025 8:56 am
by Micron
Do you have a 12v LED attached to the other end of the red and black wires?
Also you have wired everything incorrectly, look at this post
https://www.ukpoc.co.uk/forum/viewtopic.php?f=32&t=469 and this one
https://www.ukpoc.co.uk/forum/viewtopic.php?f=32&t=2713
Re: ABS fault
Posted: Wed Jun 11, 2025 4:34 pm
by Sunfly
Just out of interest has anyone ever scanned a probe with an obd1 scanner and did it work?
I tried to diagnose what turned out to be a cps cut wire with an analogue circuit tester and it gave me an exhaust sensor fault.
Re: ABS fault
Posted: Thu Jun 12, 2025 8:06 am
by Micron
Bob, speak with Malcolm, he has an OBD1 tester for a Ford Probe